Summit Oilfield Lubricants & Sealants
Master Valve Flush
1611-MVF — Liquid Valve Clean
Product Information
Master Valve Flush 1611-MVF increases the efficiency of your operation by allowing easy valve breakout whereby valves operate freely for months. 1611-MVF both penetrates and cleans valves that are difficult to operate or stuck. This product is very effective at removing deposits such as rust, lacquer or gum which can be the result of residual valve lubricants. This left over lubricant can shut down valves. 1611-MVF should not be used on oxygen service and is effective with most valve lubricants and sealants. Over time it will make your job run smoother.
This product can be used on all lubricated valves that are hard to operate. Use conventional lubricating equipment to apply 1611-MVF. After the product is pumped into the valve, wait about 10 minutes then slowly turn the valve. The process should be repeated until the valve opens freely. This product is available in weight of 40 lbs. (18.1 kgs).
- Nonflammable
- Prevents rust and corrosion
- Resistant to most chemicals
- Eliminates costly shut down and valve repair
- Removes residual gum, lacquer, and rust deposits left by valve lubricants
Typical Observations
| Color | Clear |
| Physical State | Liquid |
| Odor | Sweet |
| Density, lb/gal @ 77°F (25°C) | 7.50 |
| Specific Gravity @ 77°F (25°C) | 0.90 |
| Flash Point, ASTM D-92 | 150°F |
| Evaporation Loss, ASTM D-972 @ 210°F (98°C) | 116 (Ethyl Ether) |
| Shelf Life (unopened container) | 3 years |