MWS 30W
(Wireline Lube & Seal)
Made in USA
- Provides scaling under extreme temperature conditions
- Protects against the corrosive effects of H2S
- Increases wireline life
- Reduces drip and splatter at well location
- Protects against corrosion from downhole chemicals
- Prevents loss of well condensates and gases during wireline operation
Master Wireline Seal is a 30 viscosity lubricating sealant for extreme temperature sealing. The adding of corrosion inhibitors allows more effective wireline lubrication and ease of wireline operations. In addition to maintaining and holding higher seal pressures, Master Wireline Seal reduces friction of the wireline, thus keeping wear on wireline and flow tubes to a minimum. Master Wireline Seal retain higher working pressures, resulting in the reduction of loss of condensate, fluids, or gas from well.
Master Wireline Seal is most productive under extreme temperature conditions. It is also effective under high shock conditions for the reduction of drip and splatter. The special cohesive and adhesive proper¬ties prevent wellsite contamination.
Master Wireline Seal is inhibited against the corrosive effects of acids, caustics, salt water, and hydrogen sulfide (H2S).
This product is available in Weight of 16 gal - 128.6 lbs. and 55 gal - 430 lbs.
Typical Observations
| Color | Yellow |
|---|---|
| Texture | Tacky Yellow |
| Odor | Mild |
| API Gravity @ 60°F (15°C) | 31 |
| Density, lb/gal @ 77°F (25°C) | 7.35 |
| Specific Gravity @ 77°F (25°C) | 0.88 |
| Flash Point, ASTM D-92 | 390°F (198°C) |
| Pour Point, ASTM D-97 | 31°F (-0.5°C) |
| Viscosity, Kinematic @ 40°C, cSt | 16,500-18,500 |
| Viscosity Index (VI) | 332 |
| Rust Preventive Test ASTM D-3603 @ 140°F (60°C) | Pass |