B-MWS 24W
(Bio Wireline Lube & Seal)
Made in USA
- Increases wireline life
- Increases protection against H2S
- Penetrates wireline to core
- Economical
- Protects against corrosive effects of downhole chemicals
- Easy to apply using standard spray equipment
- Can be used on braided line or slick line
Bio Master Wireline Seal will protect the complete braided wireline against the corrosive effects of acids, caustics and most chemicals. Bio Master Wireline Seal is a wireline corrosion inhibitor designed and manufactured to protect wireline from the effects of corrosive chemicals commonly found downhole. It is applied at the spool to each layer of wireline. Bio Master Wireline Seal increases protection against hydrogen sulfide (H2S) and saltwater. It contains special wetting agents which enable it to penetrate the surface to the inner core of the braided line.
Bio Master Wireline Seal is designed to be used with spray equipment commonly mounted on many wireline trucks or skid mounted units. It also provides a lubricating effect to the wireline, thus reducing wear caused by continuous use.
This product is available in Weight of 5 gal - 44.5 lbs., 16 gal - 143.8 lbs., and 55 gal - 496.5 lbs.
Typical Observations
| Color | Amber |
|---|---|
| Odor | Mild Hydrocarbon |
| Density, lb/gal @ 77°F (25°C) | 7.10 |
| Specific Gravity @ 77°F (25°C) | 0.851 |
| Flash Point, ASTM D-97 | 148°F (64°C) |
| Pour Point, ASTM D-97 | >-58°F (>50°C) |
| Viscosity, #4 Ford Cup @ 77°F (25°C) | 13-15 sec |
| Rust Preventive Test, ASTM D-3603 | Pass |
| Shelf Life (unopened container) | 2 Years |