007-S
( Multi Purpose Synthetic Polymer Lubricant)
Made in USA
- Resists washout
- Prevents corrosion
- Reduces friction and wear
- Premium multipurpose grease for all operations
- Services temperatures from -50°F to >450°F (-45°C to >232°C)
- Provides residual lubrication to critical areas of downhole tools
Lube All 007-S is a superb synthetic polymer-based multipurpose, water-repellent lubricant/grease for all applications including but not limited to the oilfield, marine, automotive, industrial, and manufacturing industries.
Lube All 007-S is recommended for a variety of applications such as wireline, wireline vehicles, winches, drilling, drilling took vehicle lubrication, downhole drilling tools, downhole tools where washout prevention is necessary, sealing, WKM gate, pipeline ball valves, wellhead and valves, gearbox, rollers, pulleys, bearing, wheel bearings, water pumps, water well rigs, vehicles, a Trailer hitch, and much other equipment and parts.
Lube All 007-S fulfills complete lubricating grease requirements. It provides a microscopic lubricating coating that eliminates metal-to-metal contact and residual lubrication long after other lubricants have washed out. It is used where washout resistance is critical to operation.
Lube All 007-S provides excellent stability arid EP characteristics. It remains on heating surfaces longer, prolonging hearing life and extending lubrication intervals. Lube All 007-S adds stability and resistance to the chemical change.
This product is available in Weight of cart pack (10/pack of 14 oz.) 9 lbs., Case (12 pack of 20 oz.) 10.5 lbs., Case (40 pack of 14 oz.) 35 lbs., 1. gal - 7 lbs., 16 gal - 120 lbs_, and 55 gal - 400 lbs.
Typical Observations
| Color | Blue |
|---|---|
| Texture | Smooth |
| Thickener | PAO |
| Density, lb/gal @ 77°F (25°C) | 7.55 |
| Specific Gravity, @ 77°F (25°C) | 0.904 |
| Penetration, ASTM D-217 @ 77°F (25°C) | 280 - 290 |
| Flash Point, ASTM D-92 | 530°F (277°C) |
| Dropping Point, ASTM D-2265 | >500°F (>260°C) |
| Corrosion Preventive Properties, ASTM D-1743 @ 127°F (51°C) | Pass |
| Evaporation Loss, ASTM D-972 @ 210°F (98°C) | Nil |
| Viscosity of Base Oil cst, @ 40°C Viscosity of Base Oil cst @ 100°C |
154.3 12.1 |
| Water Washout Characteristics, ASTM D-1264 @ 100°F (37°C) | 2.8% |
| Four gall Wear Test, ASTM 0-2266, 40 Kg, 1200 rpm @ 167°F (80°C) 1 Hr. Average Wear Scar. Diam, mm |
0.72 |
| Low Temperature Torque, ASTM 0-1478 @ -25°F (-31°C) Gram-Cm | -25°F (-31°C) |
| - Starting Above 14.750 Running 10 Min. - Running 60 Min |
5900 1829 |
| Oil Separation, ASTM 0-1 742 @ 77°F (25°C) | 2.6% |
| Oxidation Stability, ASTM 0-942 @ 210°F (98°C), 100 Hrs. PSI Loss | 2.0 |
| - No Presence of Varnish, Gum. or Lacquer-Like Materials on the Bearing Surface | 0.19 grs. |
| Roll Stability, ASTM D-1831, 2 Hr. @ 77°F (25°C), Initial Penetration @ 77°F (25°C) | 268 |
| - Final Penetration @ 77°F (25°C) | 279 |
| - Change | +11 |
| 4-Ball EP Weld Load | 315 Pass |
| Kgf (ASTM D-2596) | 400 Weld |
| Timken Load, lb, ASTM D-2509 | 70 |
| Shelf Life (unopened container) | 2 Years |